Rocky Mountain Slayer Alloy 50 2021

MTB Enduro

Groupset

Shimano XT

Frame material

Alloy

Wheel size

27,5"

Suspension type

Full suspension

Weight

17,15 kg

Front travel

180mm

Rear travel

180mm

About the Rocky Mountain Slayer Alloy 50 2021

The Rocky Mountain Slayer Alloy 50 2021 is a Full suspension Enduro Mountain Bike with a alloy frame. Equipped with a Shimano XT drivetrain. Its features include internal routing, dropper seatpost, and boost 148. The bike weighs approximately 17,15 kg.

Features

The Rocky Mountain Slayer Alloy 50 2021 has 5 features listed below.

Internal routing More info

Dropper seatpost More info

Boost 148 More info

Hydraulic disc brakes More info

Tubeless ready More info

Specifications

Acessories
Grip	Ergon GD10 EVO Lock On

Components
Steam	Rocky Mountain 35 AM \| 5° Rise \| All Sizes = 40m
Saddle	WTB Volt Race \| Cromoly Rails \| 142mm Width
Headset	FSA Orbit NO.57E \| 36°x45° Bearings \| 30.2mm x 41mm x 7.1mm Upper \| 40mm x 51.8mm x 7.5mm Lower \| 1.5" Crown Race
Seatpost	Race Face Aeffect R Dropper 30.9mm \| Shimano MT500 Remote \| SM = 125mm \| MD = 150mm \| LG - XL = 175mm
Handlebar	Rocky Mountain AM \| 780mm Width \| 27.5 = 38mm Rise \| 29 = 25mm Rise \| 9° Backsweep \| 5° Upsweep \| 35mm Clamp
Brakes	Shimano SLX BR-M7000

Drivetrain
Crankset	Race Face Aeffect Cinch \| 27.5 = 34T \| 29 = 32T \| 24mm Spindle \| 170mm Crank Length
Shifter	Shimano SLX
Bottom bracket	Shimano SM-BBMT500
Rear derailleur	Shimano Deore XT RD-M8100 284 g SGS 12s
Average weight (g) 284 B axle hollow B axle material Stainless steel Bracket body finish Painted Bracket body material Aluminum Compatible chain HG 12-speed Lower pulley max 51T Lower pulley min 51T Model RD-M8100-SGS P axle material Steel pulley.guide_pulley_bearing Sealed bearing pulley.screws_material Stainless steel pulley.sunken_type_pulley_screw Pulley teeth 13T pulley.tension_pulley_bearing Sealed bearing Pulley cage SGS Speeds 12 Upper pulley max 10T Upper pulley min 10T Total capacity 41T
Cassette	Shimano SLX CS-M7100-12 HYPERGLIDE+
Aluminum gear finish Anodized Aluminum gear pieces 1 Aluminum spider arm finish Painted Aluminum spider arm pieces 1 Combination names 10-45T 10-51T Compatible chain HG 12-speed Lock ring finish Anodized Lock ring material Aluminum Model CS-M7100-12 Steel gear finish Plated Steel gear pieces 11 Type HYPERGLIDE+ Weights 10-45T: 513g 10-51T: 534g
Chain	Shimano CN-M7100 252 g
Average weight (g) 252 Chromizing treatment roller link pin Model CN-M7100 Pin link plate Gray Roller link plate SIL-TEC Type HG 12-speed

Frameset
Frame	FORM™ Alloy. Full Sealed Cartridge Bearings. Press Fit BB92. Internal Cable Routing. 2-Bolt ISCG05 Tabs. RIDE-4™ Adjustable Geometry + Suspension Rate. 29: 170mm Travel / 27.5: 180mm Travel. FORM™ Alloy Rear Triangle
Rear suspension	Fox DHX2 Performance
Front suspension	Fox 38 Float Performance

Wheels
Rims	WTB ST i30 TCS 2.0 Tubeless \| Tubeless Ready - Tape \| Valves Incl \| 32H
Tires	F: Maxxis Minion DHF 2.5 WT 3C MaxxGrip DD Tubeless Ready // R: Maxxis Minion DHR II 2.4 WT 3C MaxxGrip DD Tubeless Ready
Spokes	DT Swiss Champion 2.0
Rear hub	DT Swiss 370 Boost 148mm \| RMB Axle \| 163mm x 12mm x 1.5mm
Front hub	Rocky Mountain Sealed Boost 15mm

Follow your favorite drivers

Receive notifications when your favorite riders finish UCI races.

Report incorrect information

Geometry

Size	SM	MD
a Seat tube length	380,0	420,0
b Seat tube angle	75,4º	75,4º
c Top tube length	571,0	595,0
d Head tube length	90,0	95,0
e Head tube angle	63,9º	63,9º
f Rake	43,0	41,0
g Trail	126,0	129,0
h Wheelbase	1177,0	1202,0
i Chainstay length	428,0	428,0
j Bottom bracket drop	18,0	18,0
k Stack height	592,0	597,0
l Reach	416,0	441,0
m Standover height	803,0	803,0
x Bottom bracket height	337,0	337,0
y Front center	750,0	775,0

Subscribe to our newsletter

Receive the latest news in the world of cycling, new bike releases, trends and much more.

Don't worry, we hate SPAM just like you.

Compare bikes

Select at least one more bike.